Press Releases
World of Tools 02/10
08/10/2010
Tools for turbine maintenance - Intelligent tooling solutions for IMTS - Technology Days - a complete success - Russia's commerical mills are grinding differently
World of Tools 01/10
04/19/2010
Ball running track milling on constant velocity joints - Milling by circular interpolation in boundary areas - Newest developments for high-feed milling and high performance reaming - Czech Republic - successful in the market for 15 years
Production Machining
03/31/2010
The two Type 636 slot mills rough and finish mill the recesses from the solid material. Slots in the range of 1.5- to 3-mm width and as much as 12-mm depth can be milled with the standard cutters.
Production Machining
MICRO manufacturing - Winter 2009
02/08/2010
Avoiding bad breaks when boring There's a basic misconception about applying micro boring bars to finish small holes: the tools won't work.
MICROmanufacturing
Creating the Indexable Insert
03/05/2010
0
In the shop, we are often told how to use a cutting tool, but not necessary the mechanics behind the tool itself or how the tool is manufactured. A few articles Production Machining has published in the past discuss this topic.
http://www.productionmachining.com/articles/c
Horn Company Profile
03/05/2010
Company Overview: HORN USA is the U.S. representative of Paul Horn GmbH, Tübingen, Germany. Paul Horn GmbH was founded in 1969, with HORN USA founded in 1998. HORN has quickly become a world leader in grooving technology.
CTE
World of Tools 01/09
07/09/2009
Machining superalloys New: diamond tools for mirror turning Broaching on CNC machines Grooving tools from Rotterdam Paul Horn GmbH
More Effective Groove Milling For Gearboxes
03/05/2010
Manufacturers that produce standard product lines have an advantage over contract shops in that they can continually upgrade their processes based on predictable machining needs.
Matt D. Danford, mdanford@mmsonline.com
Up to the challenge
03/31/2009
The challenge of boring holes smaller than 0.250" in diameter can cause trepidation—even among experienced machinists. Not only is it nearly impossible to see what is happening inside of the hole, but the required tooling also tends to be fragile.
Fundamentals of grooving
03/31/2009
As with any turning application, the keys to good performance when OD grooving are choosing the best tool for the material and applying it at the proper cutting parameters.
The Tool Channel