Print page

 Home » Products » Special Tools » Example 3

Find contact person

You can find your contact person by using your customer number:

 

PAUL HORN Worldwide

We are active in more than 70 countries. With our local partners we offer you a fast and competent service to facilitate precision machining.

PAUL HORN worldwide

Technical information

Material: 20MnCr5

Case hardened 58-62 HRC

Cutting data:
Vc = 140 m/min
Vf = 0.08 mm

Example 3

GROOVING OF HARDENED PARTS
Hardturning on Gear wheel

Special CBN-tipped insert type S117 is used to finish the width of the groove. The stock removal is approximately 0.15 - 0.2 mm (.006˝ - .008˝). The insert is ground to final width of the groove.

Both flanks are machined at the same time (Rz=2.3 μm). To obtain high surface finish, the insert has a wiper flat on both side cutting edges.Stable machining conditions are imperative. No coolant.