HORN Solutions


Milling

You are here:Home  HORN Solutions  Milling

Horn Circular Technology

Horn Circular Technology (HCT) software generates estimated cutting data that is specific to HORN tooling based on supplied parameters. Review your input carefully before applying the suggested feeds and speeds.

Please contact the Horn USA Technical department should you require assistance or need to verify your data.

>>Proceed to HCT and click on "Guest Access" in the lower left corner.

Whirling System Selection Tool

Find the correct Whirling tools for your machine and whirling unit.

>>Whirling System Selection Tool

Milling Tools

Groove Milling by Circular Interpolation

Systems: M306 / M308 / M311 / M116 / M313 / M328 / M332 / M335

Tool system with 3 and 6 effective teeth for:

  • Groove Milling
  • Full Radius Milling
  • Chamfering
  • Bore Milling
  • Thread Milling
  • Face milling

From bore diameter 4.3 mm 
Milling cutters up to cutting width 10 mm

Systems: M306 / M308 / M311 / M116 / M313 / M328 / M332 / M335

Systems: M275 / 380 / 381

Cutter heads and side milling cutters with indexable inserts Type 314 bolted on one side

  • Milling from bore diameter 45 mm

 

 

 

Systems: M275 / 380 / 381

Slot Milling

Systems: M101 / M310 / M382 / M383

Milling tool for 

  • Groove milling  
  • Slot cutting 

With indexable inserts

Systems: M101 / M310 / M382 / M383

Thread Milling

Systems: M275 / M306 / M308 / M311 / M313 / SM328 / M332 / 380

Milling tools for producing

  • Metric ISO threads
  • Whitworth pipe threads

 

 

Systems: M275 / M306 / M308 / M311 / M313 / SM328 / M332 / 380

Gear Milling

Sytems: M313 / M274

Milling tools for producing gears

  • Up to: Module 6
  • Basic Profile 1 according to DIN 3972 for Finishing
    Sytems: M313 / M274

    Chamfer Milling

    Sytems: M306 / M308 / M311 / M313 / SM328 / 380

    Milling tools for chamferting 

    • Top and bottom of bores
    • 3 and 6 flute tools available

     

     

     

    Sytems: M306 / M308 / M311 / M313 / SM328 / 380

    Face Milling

    Systems: M306 / M308 / M311 / M313 / SM328 / 380

    Milling tools for face milling 

    • ER and straight shank holders specific for swiss machines and small lathes

     

     

     

    Systems: M306 / M308 / M311 / M313 / SM328 / 380

    T-Slot Milling

    Systems: M311 / M313 / M328

    Milling tool making T-slots for slot 

    • Widths 17 mm, 20 mm and 24 mm

     

     

     

    Systems: M311 / M313 / M328

    Polygon Milling

    Systems: M275 / 381

    Tool system for making 2, 3, 4, 5 or 6 edge faces on turned parts

    • Solutions for various lathes with driven tooling

     

     

     

    Systems: M275 / 381

    Thread Whirling

    Systems: M302 / 389

    Tool system for making special threads on lathes

    • Standard and special solutions for the whirling heads realised for all common interfaces

     

     

     

    Systems: M302 / 389

    Solid Carbide Tools

    System: DC

    Solid carbide milling cutter for Milling by Circular Interpolation

    • Groove Milling
    • Thread Milling - Partial Profile
    • Thread Milling - Full Profile
    • Chamfer Milling

    Cutting edge diameter from 0.7 mm
     

    System: DC

    Systems: DP / DS

    Solid carbide milling cutter for 

    • Steel (soft and hard), 
    • Copper, 
    • Graphite, 
    • Aluminum

    Cutting edge diameter from 0.2 mm
    Full radius, torus, micro, end, roughing and double radius mills

    Systems: DP / DS

    Multi-Milling

    System: DG

    Milling system with replaceable carbide cutting heads for

    • Center Cutting
    • Groove Milling
    • Chamfering
    • Copy Milling
    • High Feed Milling
    System: DG

    Milling with Indexable Inserts

    Systems: DA / DAH

    Shank and industry standard threaded connection milling cutter for 

    • Face milling, 
    • Plunge milling, 
    • Corner milling, 
    • Chamfering, 
    • Angled grooving

    Positive inserts geometry for easy cut

    Systems: DA / DAH

    Face Groove Milling and Fine Boring

    URMA Modular System

    • Axial end facing with URMA IntraMax 
    • Finish boring with URMA fine drill head

     

     

     

    URMA Modular System