You are here:Home  Press  Digital Media Outlet

Digital Media Outlet

World of Tools - 2017, Issue 2

Inside HORN's Customer Magazine

Special Features:

    • Medical Technology
    • Research Projects

    Additional Focus on:

    • Materials: Nickel-Based Alloys
    • High-Performance Milling of Difficult Materials

      Publication date: 08/01/2018

      World of Tools - 2018, Issue 1

      Inside HORN's Customer Magazine

      Special Features:

        • Aviation
        • From Initial Design to Serial Production

        Additional Focus on:

        • Trade Shows: Sharing Ideas Face to Face
        • About Us: Paul Horn Hall

          Publication date: 08/01/2018

          World of Tools - 2017, Issue 1

          Inside HORN's Customer Magazine

          Special Features:

            • Technology and Sport
            • Surface Quality

            Additional Focus on:

            • HORN Technology Days 2017
            • HORN on Course for the Future

              Publication date: 05/01/2017

              World of Tools - 2016, Issue 2

              Inside HORN's Customer Magazine

              Special Features:

                • Modular Tool Systems

                Additional Focus on:

                • Tangential Milling
                • Material: Free-Cutting Steel

                  Publication date: 08/01/2016

                  World of Tools - 2016, Issue 1

                  Inside HORN's Customer Magazine

                  Special Features:

                    • Ultra-Hard Cutting Materials

                    Additional Focus on:

                    • Gear Milling
                    • Polygon Milling

                      Publication date: 04/01/2016

                      World of Tools - 2015, Issue 2

                      Inside HORN's Customer Magazine

                      Special Features:

                        • Teeth Make the World Go Round
                        • Gear Toothing with the Perfect Milling Technique
                        • Broaching Internal Gear Teeth

                        Additional Focus on:

                        • New Products
                        • About Us
                        • Micro-Turning

                          Publication date: 10/01/2015

                          World of Tools - 2015, Issue 1

                          HORN Customer Magazine

                          Issue 1/15, with focus on:

                          • New Products
                          • "Unlocking Potential" - An interview with Mr. Haug
                          • Technology Days 2015

                          Special Feature on Grooving:

                          • King of Cutting Technologies
                          • Modular Systems with Internal Coolant
                          • New Product "842"

                            Publication date: 07/01/2015

                            Milling Tool Eliminates Need for Additional Equipment

                            Among the automotive parts they manufacture, Machine Tool & Gear pumps out over 112,000 truck shafts each year from its 70,000 square foot facility in Owosso, Michigan. These shafts are produced in a work cell built around a Mori-Seiki NH 4000 horizontal machining center. Recently a design change to one of the shafts created a challenge for MT&G Manufacturing Engineer Jeff Ochodnicky.

                            by Horn USA Editorial Staff
                            Production Series | July 2014

                            Source: Horn USA, Inc.
                            Publication date: 07/01/2014

                            World of Tools - 2014, Issue 2

                            HORN Customer Magazine

                            Issue 2/14, with focus on:

                            • Outlook for AMB 2014
                            • Gear milling
                            • HORN in Sweden
                            • HORN Academy

                            Special Feature on Series Production

                            • History
                            • Trends
                            • User Reports

                            Publication date: 07/01/2014

                            Milling Tool Bites Hours off Cycle Time

                            You know you have a problem workpiece on your hands when your outsourcing vendors turn down the work. As a result, Cambron Engineering's already full backlog created the need for cycle time reduction. A chance encounter with one of Horn USA's Applications Engineer turned into major time savings.

                            by Horn USA Editorial Staff
                            Production Series | June 2014

                            Source: Horn USA, Inc.
                            Publication date: 06/01/2014

                            Cool Groove

                            The importance of effectively cooling the cutting zone when grooving.

                            by Jason Farthing | Technical Sales & Marketing | Horn USA
                            Cutting Tool Engineering
                            Volume 66 | No. 6 | June 2014

                            Please consider subscribing to Cutting Tool Engineering

                            Source: Cutting Tool Engineering - June 2014
                            Publication date: 06/01/2014

                            Targeting Micro Parts

                            Tooling investment supports precision, profitability.

                            by Jim Barnes | Contributing Editor
                            Shop Metalworking Technology
                            Volume 3 | No. 3 | May 2014

                            Please consider subscribing to Shop Metalworking Technology

                            Source: Shop Metalworking Technology - Cutting Tools - May 2014
                            Publication date: 05/01/2014

                            New Trends in Cutting Tool Products

                            Contribution to ISM Supplier Round Table

                            by Jason Farthing | Technical Sales & Marketing
                            Horn USA, Inc.

                            Issue: March / April 2014

                            Source: Industrial Supply Magazine - Supplier Round Table - Apr. 2014
                            Publication date: 04/01/2014

                            The Aerospace Precision-Machining Race

                            To meet increasing demand, machine tool builders are marshaling new resources, technologies and strategies.

                            by Jim Lorincz | Senior Editor
                            Manufacturing Engineering
                            Volume 152 | No. 3 | March 2014

                            Please consider subscribing to Manufacturing Engineering

                            Source: Manufacturing Engineering - Aerospace Parts Machining - Mar. 2014
                            Publication date: 03/01/2014

                            Collet Chucks Keep the Show Going

                            Demonstrating a machine tool's ability to cost-effectively boost productivity to a potential customer isn't effective if the cutting tool chatters at high machining parameters.

                            by CTE Editorial Staff
                            Volume 66 | Issue 1 | January 2014

                            Source: Cutting Tool Engineering - Productive Times - Jan. 2014
                            Publication date: 01/01/2014

                            World of Tools - 2014, Issue 1

                            HORN Customer Magazine

                            Issue 1/14, with focus on:

                            • Horn Hartstoffe GmbH
                            • The rising market in Poland
                            • HORN Academy
                            • A look back at Metav

                            Special Feature on Large Part Machining

                            • Industries
                            • Applications
                            • Solutions

                             

                             

                            Publication date: 01/01/2014

                            Cracking the Code

                            Determining when complex turning and multitasking are the right solutions.

                            by Kip Hanson | Contributing Editor
                            Cutting Tool Engineering
                            Volume 65 | Issue 12 | December 2013

                            Please consider subscribing to Cutting Tool Engineering

                            Source: Cutting Tool Engineering - Cover Story - Dec. 2013
                            Publication date: 12/01/2013

                            Cutting Better Threads

                            Cutting Tools: Thread milling comes into its own as a productive process.

                            by Jim Barne | Contributing Editor
                            Shop Metalworking Technology
                            Volume 2 | No. 6 | September 2013

                            Please consider subscribing to Shop Metalworking Technology

                            Source: Shop Metalworking Technology - Cutting Tools - Sept. 2009
                            Publication date: 09/01/2013

                            HORN Technology Days 2013

                            Canadian Metalworking's coverage of Horn Technology Days 2013

                            by Jim Anderton | Editor
                            Canadian Metalworking
                            September 2013 Issue

                            Please consider subscribing to Canadian Metalworking

                            Source: Canadian Metalworking - Tool Talk - Sept. 2013
                            Publication date: 09/01/2013

                            Anatomy of a High-Feed Insert

                            For any shop tasked with heaving hogging, chances are good that the go-to strategy involves takeing a light cut at heavy feed rates.

                            by Matt Danford | Associate Editor
                            Modern Machine Shop
                            Volume 66 | No. 5 | October 2013

                            Please consider subscribing to Modern Machine Shop

                            Source: Modern Machine Shop - Rapid Traverse - Sept. 2013
                            Publication date: 09/01/2013

                            HORN Technology Days 2013

                            Production Machining's Coverage of Horn Technology Days 2013

                            by Chris Koepfer | Senior Editor
                            Production Machining
                            Volume 13 | Issue 9 | September 2013

                            Please consider subscribing to Production Machining

                            Source: Production Machining - Cutting Tools - Sept. 2013
                            Publication date: 09/01/2013

                            World of Tools - 2013, Issue 1

                            HORN Customer Magazine

                            Issue 1/13, with focus on:

                            • Sliding head turning strategies
                            • The art of grinding
                            • HORN Technology Days 2013

                            Special Feature on Hydraulics:

                            • Technology Trends
                            • Innovations
                            • Solutions

                            Publication date: 01/01/2013

                            Medical Shop Increases Tool Life with Hex Broaching

                            A manufacturer of spinal implants and surgical instruments achieves immediate results in a switch from rotary broaching to hex broaching.

                            by Chris Felix | Senior Editor
                            Production Machining
                            Volume 12 | Issue 9 | September 2012

                            Please consider subscribing to Production Machining

                            Source: Production Machining - Cutting Tools - Sept. 2012
                            Publication date: 09/01/2012

                            World of Tools - 2012, Issue 2

                            HORN Customer Magazine

                            Issue 2/12, with focus on:

                            • Horn Academy
                            • Innovations at AMB and IMTS
                            • HORN in China

                            Publication date: 07/01/2012

                            Horn USA Awarded Business of the Year

                            Horn USA is proud to accept the ‘Business of the Year’ award for our sustainability efforts and participation in the Tennessee Valley Authority's (TVA) Green Power Switch program.

                            Source: Horn USA, Inc. - April 2012
                            Publication date: 04/01/2012

                            World of Tools - 2012, Issue 1

                            HORN Customer Magazine

                            Issue 1/12, with focus on:

                            • Good things come in threes
                            • Innovations at METAV
                            • Thread milling for the highest demand
                            • Brazil - Potential for growth

                            Publication date: 01/01/2012

                            Cutting Tool Coating Production

                            Cutting Tool Coating Production By Duane Drape National Sales Manager Horn USA

                            Source: Production Machining - Tooling - Sept. 2011
                            Publication date: 09/01/2011

                            World of Tools - 2011, Issue 2

                            HORN Customer Magazine

                            Issue 2/11, with focus on:

                            • Interfaces for HORN tools
                            • Innovations for EMO
                            • Supermini®
                            • Coating center

                            Publication date: 07/02/2011

                            World of Tools - 2011, Issue 1

                            HORN Customer Magazine

                            Issue 1/11, with focus on:

                            • Interpolative turning of radial grooves
                            • Introducing the sales management team
                            • Minister Ursula von der Leyen visits HORN
                            • Denmark - High-tech tools in the land of the Vikings

                            Publication date: 01/01/2011

                            World of Tools - 2010, Issue 2

                            HORN Customer Magazine

                            Issue 2/10, with focus on:

                            • Tools for turbine maintenance
                            • Intelligent tooling solutions for IMTS
                            • Technology Days - a complete success
                            • Russia's commercial mills are grinding differently

                            Publication date: 07/01/2010

                            Strategy Change Leads to Performance Boost

                            The two Type 636 slot mills rough and finish mill the recesses from the solid material. Slots in the range of 1.5- to 3-mm width and as much as 12-mm depth can be milled with the standard cutters.

                            Source: Production Machining - Case In Point - Apr. 2010
                            Publication date: 04/01/2010

                            World of Tools - 2010, Issue 1

                            HORN Customer Magazine

                            Issue 1/10, with focus on:

                            • Ball running track milling on constant velocity joints
                            • Milling by circular interpolation in boundary areas
                            • Newest developments for high-feed milling and high performance reaming
                            • Czech Republic - successful in the market for 15 years

                            Publication date: 01/01/2010

                            Avoiding Bad Breaks When Boring

                            Avoiding bad breaks when boring There's a basic misconception about applying micro boring bars to finish small holes: the tools won't work.

                            Source: MICROmanufacturing - MICROmachining - Sept. 2009
                            Publication date: 12/01/2009

                            World of Tools - 2009, Issue 2

                            HORN Customer Magazine

                            Issue 2/09, with focus on:

                            • Innovative production secures location
                            • DD drill bits on the road to sucess
                            • Successful premier of Horn Technology Days
                            • Innovations at EMO

                            Publication date: 07/01/2009

                            More Effective Groove Milling for Gearboxes

                            Manufacturers that produce standard product lines have an advantage over contract shops in that they can continually upgrade their processes based on predictable machining needs.

                            Source: Modern Machine Shop - Better Production - July 2009
                            Publication date: 07/01/2009

                            World of Tools - 2009, Issue 1

                            HORN Customer Magazine

                            Issue 1/09, with focus on:

                            • Machining superalloys
                            • New: diamond tools for mirror turning
                            • Broaching on CNC machines
                            • Grooving tools from Rotterdam

                             

                             

                            Publication date: 01/01/2009

                            World of Tools - 2008, Issue 2

                            HORN Customer Magazine

                            Issue 2/08, with focus on:

                            • Successful machining, successful forming
                            • New development for drilling
                            • New production philosophy for standard and special solutions
                            • Celebrating 10 years of Horn USA

                            Publication date: 07/01/2008

                            World of Tools - 2008, Issue 1

                            HORN Customer Magazine

                            Issue 1/08, with focus on:

                            • Generator shafts for power station systems
                            • High efficiency due to thread milling by circular interpolation
                            • DIHAWAG – with Swiss determination at the front
                            • Training and advanced training at HORN

                            Publication date: 01/01/2008

                            World of Tools - 2007, Issue 2

                            HORN Customer Magazine

                            Issue 2/07, with focus on:

                            • Demanding components for the Aerospace Industry
                            • Development of a new clamping system
                            • How Supermini® are manufactured
                            • HORN in Italy – Dolce Vita in style of FEBAMETAL

                            Publication date: 07/01/2007

                            World of Tools - 2007, Issue 1

                            HORN Customer Magazine

                            Issue 1/07, with focus on:

                            • Powerful gear boxes at Fiat
                            • Sharpening the edge of the tool
                            • Measuring cutting forces - looking into the load at the cutting edge
                            • HORN Hungary - an important market develops

                            Publication date: 01/01/2007

                            World of Tools - 2006, Issue 2

                            HORN Customer Magazine

                            Issue 2/06, with focus on:

                            • Economical machining of high alloyed steels
                            • Toolholders - From the blank material to the standard or special tool
                            • Machining to the outer limits
                            • HORN USA - Dimension systems provide key to success

                            Publication date: 07/01/2006

                            World of Tools - 2006, Issue 1

                            HORN Customer Magazine

                            Issue 1/06, with focus on:

                            • Teamwork for the best solution - DaimlerChrysler Plant Gaggenau
                            • Broaching on CNC Lathes, Milling Machines and Machining Centers
                            • HORN UK - Continuity provides the key to success
                            • Hard Specialties from Gomaringen

                            Publication date: 01/01/2006

                            World of Tools - 2005, Issue 1

                            HORN Customer Magazine

                            Issue 1/05, with focus on:

                            • Sturdy manufacturing process increases durability
                            • Micro milling in tool and mold making
                            • From a blank to an individual customer solution
                            • HORN France thinks ahead

                            Publication date: 01/01/2005

                            Fundamentals of Grooving Operations

                            As with any turning application, the keys to good performance when OD grooving are choosing the best tool for the material and applying it at the proper cutting parameters.

                            Source: Cutting Tool Engineering - The Tool Channel - Oct. 2003
                            Publication date: 10/01/2003

                            Small Bores Present Big Challenges

                            The challenge of boring holes smaller than 0.250" in diameter can cause trepidation—even among experienced machinists. Not only is it nearly impossible to see what is happening inside of the hole, but the required tooling also tends to be fragile.

                            Source: Cutting Tool Engineering - Up to the Challenge - Aug. 2001
                            Publication date: 08/01/2001